Straight Leg Frames

(VC1) Price of head casting is $481.02 Australian Dollars plus GST tax if applicable

Price of complete frame is $3,476 Australian Dollars plus GST tax if applicable
Please note: This frame is welded together as per original manufacturing specifications.
It is not TIG or Heliarc welded.

TRANS BRACE STIFFENER (RFE Part Number VC36B)

These are sold in pressed sets and come loose for ease of fitment.
Depending on the year of your frame they will need either - " tacking and brazing" , or "electric welding" in place.
They have the stiffening indent pressed into them as per original and come fully pressed for seat post and rear trans lug.

Price per set is Australian $60.68 per set + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

REAR ENGINE MOUNT (RFE Part Number VC6)

Rear Engine mount is fully machined and ready to install.

Price is Australian $342.60 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

OIL TANK MOUNT (RFE Part Number VC10)

Oil Tank Mount is fully machined and ready to fit.

Price is Australian $49.95 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

RIGID RUNNING BOARD LUGS (RFE Part Number VC11)

Rigid Running Board Lugs are sold each and are fully machined and ready to fit.

Price is Australian $36.51 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

REAR INNER PRIMARY MOUNT (RFE Part Number VC14)

Fits 1936 through 1957 bikes.

Price is Australian $7.60 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

BRAKE CROSS OVER STIFFNER (RFE Part Number VC65)

Brake Cross Over Stiffner is fully machined and ready to fit.

Price is Australian $14.36 per set + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

KNUCKLEHEAD/FLATHEAD/PANHEAD REAR TRANS POST (RFE Part Number VC28)

Rear Trans Post is straight knurled and ready to fit. It is knurled like OEM and comes with matching spacer. The spacer is placed between the trans cross brace plates
These are sold as a unit.

Price is Australian $37.55 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

RIGID BRAKE CROSSOVER TUBE (RFE Part Number VC33)

Brake Crossover Tube is knurled and machined ready to accept bush.

Price is Australian $27.17 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

INTERMEDIATE BACKBONE (RFE Part Number VC35)

This part is straight knurled one end to allow the Braze to flow. The other end is contour pressed to mate to the 1 1/2" Backbone.
A 3/32" hole is drilled into this part to allow the gas and hot air to escape while brazing is taking place.
An exact reproduction of the intermediate backbone used from 1938 through to the end of the run of rigid frames in 1957.

Price is Australian $35.64 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

STRAIGHT LEG DOWN TUBE (RFE Part Number VC37)

Straight Leg Down Tube is knurled both ends and ready to fit.

Price is Australian $31.15 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

RIGID FENDER RAILS (RFE Part Number VC39R)

Fender Rails are knurled and pressed as per original. This part is for the right hand side.

Price is Australian $57.10 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

RIGID FENDER RAILS (RFE Part Number VC39L)

Fender Rails are knurled and pressed as per original. This part is for the left hand side.

Price is Australian $57.10 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

RIGID FENDER RAIL BRACE (RFE Part Number VC41)

Price is Australian $30.69 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

RIGID BOTTOM RAIL LEFT SIDE (RFE Part Number VC44)

Left Bottom Rail is knurled both ends and has chain relief as per original.

Price is Australian $95.04 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

RIGID BOTTOM RAIL RIGHT SIDE (RFE Part Number VC45)

Right Bottom Rail is knurled both ends and is formed as per original.

Price is Australian $75.24 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

LOWER SEAT POST BRACE (RFE Part Number VC47)

Lower Seat Post Brace is pressed to original shape and drilled to accept bash plate and seat post base.

Price is Australian $39.60 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

SEATPOST CROSS BRACE (RFE Part Number VC48-B)

This part is used on all frames from 1948 to 1957 only.
Note. It is not suitable for any Knuckle frame.

Price is Australian $34.61 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

RIGID REAR TRANS CROSS BRACE (RFE Part Number VC52)

Rear Trans Cross Brace is pressed to original shape and drilled to accept rear trans posts.

Price is Australian $33.74 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

LOWER TANK MOUNT (RFE Part Number VC54)

Late 1954 through 1957 low tank mount.
These low tank mounts have been pressed with a taper to fit snugly to the down tubes on original frames.
The bracket has the advance lug off the left side and is drilled and tapped to OEM specs.

Price is Australian $19.04 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

TRANSMISSION OUTRIGGER SUPPORT (RFE Part Number VC60)

Pressed to original shape. This bracket will fit snuggly around tube to give a nice tight fit for brazing or electric welding, depending on the correct welding procedure for the year of your frame. Shim plate is spot welded to bracket as was OEM.

Price is Australian $21.78 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

REAR LOWER FENDER SUPPORT (RFE Part Number VC62)

Rear Lower Fender Support is pressed to original shape and ready to fit.

Price is Australian $31.88 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

THROTTLE CABLE BRACKET (RFE Part Number VC59)

Throttle Cable Bracket is fully machined and ready to fit.

Price is Australian $6.93 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

RIGID SEAT POST (RFE Part Number VC50)

The Rigid Seat Post is machined to accept seat post bush and has sweat brazed stiffener already fitted in the bottom half.

Price is Australian $63.36 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

PANHEAD BACKBONE (RFE Part Number VC19 1952 and up)

Panhead Backbone with all correct relief pressings.

Price is Australian $55.44 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

REPLACEMENT SPEEDO PLATE CASTING (RFE Part Number VC16)

Replacement speedo plate casting. Correct for 1948 and up. Has steering dampner dowl hole, speedo hole and speedo base plate holes machined and tapped and pads faced. This is made of Steel not cast iron and can be welded on with Tig, Heliarc Mig or oxy. You will note the picture with the item located with a 7/8" drill to the steering head assembly. I have purposely made this part to have a gap underneath to ensure that the weld goes under the part "penetration". When you die grind the weld after fitment to blend it to the steering head assembly the penetration weld is there to hold the part.

Price is Australian $95.04 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

STRAIGHTLEG SIDECAR LUGS (RFE Part Number VC105L (Left), VC105R (Right) )

These are made of Steel and will suit 1937 through 1947 and late 1954 through 1957 frames. The part numbers and Hallmarks are clear and have a clear flash mark running down the front and rear of the part exactly as did Original parts.

Price is Australian $256.08 per side + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

LEFT AXLE CARRIER (RFE Part Number VC108L)

Exact reproduction of Left axle carrier from 1938 - 1957. Comes fully machined and ready to fit. Faithful reproduction of the part number and Hallmark.

Price is Australian $317.79 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

RIGHT AXLE CARRIER (RFE Part Number VC108R)

Exact reproduction of 1938 - 1957 right axle carrier. Machined to exact OEM tolerances. Faithful reproduction of the part number and Hallmark. This part comes fully machined and ready to fit. Can be supplied with plug weld holes if desired.

Price is Australian $317.79 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax

SEAT POST CLUSTER (RFE Part Number XE-1b)

Seatpost cluster for 1952 to 1957 Panhead Wishbone frames. The spigot that slips into the end of the backbone is machined for 1/8" inch wall tube. 1952 through 1957 frames used 1/8" inch wall tube for the backbone. If you are unsure of the tube thickness, look down the hole for your speodo cable "in the steering neck" and you can clearly see the thickness of the tube. If you are still having problems working out the exact date of the frame contact me and I have other ways to work it out. The grease nipple hole can be drilled and tapped by request.

Price is Australian $287.48 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax