29 Degree Frame

The 29 Degree frame was the second of the classic frames.

To purchase any of these items or to enquire about availability please send an email to steve@raceframe.com.au .

OVERSEAS ENQUIRIES : Please use this CURRENCY CONVERTER to convert Australian Dollars to your money.

Use the email prompt at the bottom of this page for any other enquiries and freight quotes


(VC68) Price of 29 Degree casting is $500.94 Australian Dollars plus GST tax if applicable		Price of complete frame is $3,505.04 Australian Dollars plus GST tax if applicable. Please note: This frame is welded and sweat brazed together as per original manufacturing specifications. It is not TIG or Heliarc welded.

Here's some additional pictures showing further details of the head casting.

Click on the images below for a larger picture.

TRANS BRACE STIFFENER (RFE Part Number VC36B)
	These are sold in sets of two and come loose for ease of fitment. Depending on the year of your frame they will need either - " tacking and brazing" , or "electric welding" in place. They have the stiffening indent pressed into them as per original and come fully pressed for seat post and rear trans lug. Price per set is Australian $60.68 per set + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
OIL TANK MOUNT (RFE Part Number VC10)
	Oil Tank Mount is fully machined and ready to fit. Price is Australian $49.95 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
RIGID RUNNING BOARD LUGS (RFE Part Number VC11)
	Rigid Running Board Lugs are sold each and are fully machined and ready to fit. Price is Australian $36.51 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
REAR INNER PRIMARY MOUNT (RFE Part Number VC14)
	Fits 1936 through 1957 bikes. Price is Australian $7.60 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
FRONT ENGINE MOUNT (RFE Part Number VC64)
	Front engine mount to suit 1937 through to the end of the 1947 production run. Suitable for all Knuckle and Flathead frames to 1947 only. Price is Australian $388.83 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
BRAKE CROSS OVER STIFFNER (RFE Part Number VC65)
	Brake Cross Over Stiffner is fully machined and ready to fit. Price is Australian $14.36 per set + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
KNUCKLE/FLATHEAD TOP ENGINE MOUNT (RFE Part Number VC26)
	Top Engine Mount is fully fabricated and ready to fit. Price is Australian $44.79 per set + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
KNUCKLEHEAD/FLATHEAD/PANHEAD REAR TRANS POST (RFE Part Number VC28)
	Rear Trans Post is straight knurled and ready to fit. It is knurled like OEM and comes with matching spacer. The spacer is placed between the trans cross brace plates These are sold as a unit. Price is Australian $37.55 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
RIGID BRAKE CROSSOVER TUBE (RFE Part Number VC33)
	Brake Crossover Tube is knurled and machined ready to accept bush. Price is Australian $27.17 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
INTERMEDIATE BACKBONE (RFE Part Number VC35)
	This part is straight knurled one end to allow the Braze to flow. The other end is contour pressed to mate to the 1 1/2" Backbone. A 3/32" hole is drilled into this part to allow the gas and hot air to escape while brazing is taking place. An exact reproduction of the intermediate backbone used from 1938 through to the end of the run of rigid frames in 1957. Price is Australian $35.64 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
SEAT POST CLUSTER (RFE Part Number XE-1)
	Seat Post Cluster is fully machined ready to fit. Price is Australian $287.48 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
STRAIGHT LEG DOWN TUBE (RFE Part Number VC37)
	Straight Leg Down Tube is knurled both ends and ready to fit. Price is Australian $31.15 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
RIGID FENDER RAILS (RFE Part Number VC40)
	Fender Rails are knurled and pressed as per original and sold left or right side. Price is Australian $85.14 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
RIGID FENDER RAIL BRACE (RFE Part Number VC41)
	Price is Australian $30.69 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
RIGID BOTTOM RAIL LEFT SIDE (RFE Part Number VC42)
	Left Bottom Rail is knurled both ends and has chain relief as per original. Price is Australian $114.84 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
RIGID BOTTOM RAIL RIGHT SIDE (RFE Part Number VC43)
	Right Bottom Rail is knurled both ends and is formed as per original. Price is Australian $95.04 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
BACKBONE (RFE Part Number VC46)
	Backbone is supplied with straight knurling on the neck end. An internal stiffner tube is sweat brazed into the seat post cluster end and a relief is pressed to the under side to clear the inlet tin on FL's. All are exact duplicates of the original item produced by the factory from late 1940 to 1947. Price is Australian $95.04 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
LOWER SEAT POST BRACE (RFE Part Number VC47)
	Lower Seat Post Brace is pressed to original shape and drilled to accept bash plate and seat post base. Price is Australian $39.60 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
UPPER SEAT POST BRACE (RFE Part Number VC48 1938-1947)
	Upper Seat Post Brace is pressed to original shape and drilled to accept seat post. Price is Australian $39.60 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
RIGID SEAT POST (RFE Part Number VC49)
	The Rigid Seat Post is machined to accept seat post bush and has sweat brazed stiffener already fitted in the bottom half. Price is Australian $63.36 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
RIGID REAR TRANS CROSS BRACE (RFE Part Number VC52)
	Rear Trans Cross Brace is pressed to original shape and drilled to accept rear trans posts. Price is Australian $33.74 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
TRANSMISSION OUTRIGGER SUPPORT (RFE Part Number VC60)
	Pressed to original shape. This bracket will fit snuggly around tube to give a nice tight fit for brazing or electric welding, depending on the correct welding procedure for the year of your frame. Shim plate is spot welded to bracket as was OEM. Price is Australian $21.78 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
REAR LOWER FENDER SUPPORT (RFE Part Number VC62)
	Rear Lower Fender Support is pressed to original shape and ready to fit. Price is Australian $31.88 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
REAR ENGINE MOUNT (RFE Part Number VC66)
	Fully machined and ready to fit. Please note that this item is for Knucklehead and Flatheads frames 1936 through 1947 only. You will note that the script and foundry mark are large "5/16 inch". The Panheads had a smaller ''3/16 inch'' script. For Panhead rear engine mounts go to the Wishbone or Straight leg page on this site. Price is Australian $342.60 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
LOWER TANK MOUNT (RFE Part Number VC96)
	Lower Tank Mount is pressed to original shape and ready to fit. Price is Australian $21.78 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
SLEEVING JOINT (RFE Part Number VC100)
	Steel Sleeving joint for all Knuckle and UL frames. This part is brazed to the ends of the upper rear fender brace. Price is Australian $25.74 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
LEFT AXLE CARRIER (RFE Part Number VC108L)
	Exact reproduction of Left axle carrier from 1938 - 1957. Comes fully machined and ready to fit. Faithful reproduction of the part number and Hallmark. Price is Australian $317.79 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax
RIGHT AXLE CARRIER (RFE Part Number VC108R)
	Exact reproduction of 1938 - 1957 right axle carrier. Machined to exact OEM tolerances. Faithful reproduction of the part number and Hallmark. This part comes fully machined and ready to fit. Can be supplied with plug weld holes if desired. Price is Australian $317.79 each + GST tax if applicable. Overseas orders are exempt from Australian GST Tax